Science and Technology of Welding and Joining Vol. 29, No. 5-6, out now
Welding deformation, fibre optic sensors and morphology are among the topics discussed in this issue.
IOM3 members have free online access (login required) to this and other journals published on behalf of IOM3 by Sage.
This issue contains the following articles:
Effect of elastic pre-bending on mitigating welding deformation for aluminium alloy thick-walled plates joined by FSW
Haidong Yu, Ke Yuan, Bin Gu
pp. 299–308
DOI: 10.1177/13621718241273504
Using fiber optic sensors to monitor the quality of resistance spot welding joints
Boyi Zeng, Yanjun Wang, Lei Ye, Shanglu Yang
pp. 309–318
DOI: 10.1177/13621718241272122
Morphology, mechanical property, and molten pool dynamics by narrow gap AMF-GTAW with swing filler wire
Qi Sun, Yibo Liu, Kexin Kang, Xinjun Qian, Chengyin Liu, Qinghua Zhang, Qingjie Sun
p. 319–327
DOI: 10.1177/13621718241273512
Process parameters selection for multi-layer friction surfacing of 7075 aluminium alloy
Jishuai Li, Matthieu Jadot, Jichang Xie, Matthieu B. Lezaack, Thaneshan Sapanathan, Romain Gautier, Mohamed Rachik, Aude Simar
pp. 328–336
DOI: 10.1177/13621718241275092
Joining thin copper wire and copper busbar by remote laser welding for electric motor assembly: Impact of welding parameters and pre-welding surface treatment
Tianzhu Sun, Sul Ademi, Shivam Mishra, Dipesh Varsani, Richard McMahon, Darek Ceglarek, Pasquale Franciosa
pp. 337–346
DOI: 10.1177/13621718241277364
Microstructures and mechanical properties of Co-based Elgiloy fabricated by wire arc additive manufacturing
Qingkai Shen, Jiaxiang Xue, Zehong Zheng, Xiaoyan Yu, Ning Ou, Li Jin
pp. 347–355
DOI: 10.1177/13621718241280804
Comparative analysis of filler metals on microstructure and mechanical performance of TIG-welded AISI 201 austenitic stainless steel joints
Ramy A. Fouad, Mohamed I.A. Habba, Yousef G.Y. Elshaghoul, Mohamed M. El-Sayed Seleman, Khalid M. Hafez, Hossam Hemdan El-Fahhar, Waheed S. Barakat
pp. 356–367
DOI: /10.1177/13621718241283374
Weldability of new Ni-based superalloy G27: Effect of pre-weld solution annealing on the hot cracking susceptibility
Achmad Ariaseta, Joel Andersson, Olanrewaju Ojo
pp. 368–378
DOI: 10.1177/13621718241285309
Numerical investigation of flash formation and asymmetrical cooling in resistance projection welding
Nicholas Queiroz Avedissian, Xuesong Gao, Luke Walker, Fernando Okigami, Wei Zhang, Bruce W Krakauer
pp. 379–388
DOI: 10.1177/13621718241285309