Science and Technology of Welding and Joining, Vol. 26, No. 6, ready to read
Considering nugget formation in Al/Steel clinch-resistance hybrid spot welding, realising equal-strength welding with good conductivity in Cu–Cr–Zr alloy via friction stir welding and the effect of heat dissipation on solidification cracking behaviour of austenitic stainless steel during gas tungsten arc welding.
This new issue contains the following articles, which are available to members via My IOM3.
Nugget formation analysis of Al/Steel clinch-resistance hybrid spot welding
Dewang Zhao, Daxin Ren, Gang Song, Kunmin Zhao & Zhaodong Zhang
Pages: 439-447
DOI: 10.1080/13621718.2021.1935150
Realising equal-strength welding with good conductivity in Cu–Cr–Zr alloy via friction stir welding
Y.D. Wang, S.Z. Zhu, G.M. Xie, L.H. Wu, P. Xue, D.R. Ni, B.L. Xiao & Z.Y. Ma
Pages: 448-454
DOI: 10.1080/13621718.2021.1935151
Effect of heat dissipation on solidification cracking behaviour of austenitic stainless steel during gas tungsten arc welding
Jae-Hyeong Lee, Shotaro Yamashita, Tomo Ogura & Kazuyoshi Saida
Pages: 455-460
DOI: 10.1080/13621718.2021.1935152
Metallurgical joining of aluminium and copper using resistance spot welding: microstructure and mechanical properties
Mohammad Zare & Majid Pouranvari
Pages: 461-469
DOI: 10.1080/13621718.2021.1935154
Interfacial microstructure and mechanical property in friction stir welded Mg/Al joints under low rotation speed
Xuesong Fu, Ke Chen, Zhen Zhang, Katsuyoshi Kondoh, Min Wang & Xueming Hua
Pages: 470-477
DOI: 10.1080/13621718.2021.1935155
Role of beam oscillation on electron beam welded zircaloy-4 butt joints
Lord Jaykishan Nayak & Gour Gopal Roy
Pages: 478-486
DOI: 10.1080/13621718.2021.1950498
Improved mechanical properties of laser-arc hybrid welded Al/steel dissimilar butt-joint through beam oscillation
Yunfei Meng, Laihege Jiang, Ling Cen & Ming Gao
Pages: 487-492
DOI: 10.1080/13621718.2021.1950499
Tensile properties and microstructural features of friction stir welded Al 6061 joints fabricated by various dual-pin tool shapes
A. Ghiasvand, S. Hassanifard, S. Saadi & A. Varvani-Farahani
Pages: 493-502
DOI: 10.1080/13621718.2021.1950500
