Materials Science and Technology Vol. 40, No. 17, out now

Additive manufacturing, hot deformation and selective laser melting routes are among the topics discussed in this issue.

IOM3 members have free online access (login required) to this and other journals published on behalf of IOM3 by Sage.

This issue contains the following articles:

A survey of the high-cycle fatigue performance of additively manufactured alloy 71
Matthew Mills, Meurig Thomas
pp. 1235–1244
DOI: 10.1177/02670836241245214

Effect of surface roughness and eutectic segregation on anodising of Al-Si-Cu alloys
Giulia Scampone, Giulio Timelli
pp. 1245–1254
DOI: 10.1177/02670836241245205

Influence of second phase precipitates on the microstructure and mechanical properties of WE43-0.5Ca alloy during hot deformation process
Mengyuan Xia, Huiwen Zhu, Baoyi Yu, Li Zheng, Shunning Lv, Lei Li, Tao Huang
pp. 1255–1267
DOI: 10.1177/02670836241245817

Microstructural and electrochemical behaviour of severely surface-deformed 316L steel manufactured by conventional and selective laser melting routes
Vikesh Kumar, Nilesh K. Kumbhar, Manoj D. Joshi, Yuan-Ron Ma, Indrasen Singh, Santosh S. Hosmani
pp. 1268–1284
DOI: 10.1177/02670836241245811

Dynamic recrystallisation (DRX) map of magnesium alloy for texture control with hot processing
Cong Wang, Tianjiao Luo
pp. 1285–1296
DOI: 10.1177/02670836241245809 

An optimisation of the internal roller burnishing process for magnesium composites using Taguchi Multi objective optimization method
KR. Arun prasad, M.R. Stalin John
pp. 1297–1305
DOI: 10.1177/02670836241273485