Materials Science and Technology Vol. 39, No. 18, out now
Papers include the Effect of interaction between P and Ce on properties of copper, Enhanced adsorption films of dendrimers on mild steel for super protection, and Effects of Ga and In on the properties of Zn-Al sacrificial anodes.
This issue contains the following articles, which are available to members via My IOM3.
Corrosion, fatigue and wear of additively manufactured Ti alloys for orthopaedic implants
J. Tjandra, E. Alabort, D. Barba & S. Pedrazzini
Pages: 2951-2965
DOI: 10.1080/02670836.2023.2230417
Effect of interaction between P and Ce on properties of copper
Jin-Tao Song, Yu-Duo Fu, Ke-Xing Song, Qian-Qian Zhu, Xiao-Wen Peng, Yun-Xiao Hua, Yan-Jun Zhou, Xiu-Hua Guo, Shi-Zhong An & Ying-Xuan Ma
Pages: 2966-2975
DOI: 10.1080/02670836.2023.2230004
Substitution of Zn for Cu in Mg–Y–Zn alloys designed for fracturing ball
Guoqiang Xi, Ju Xiong, Yanlong Ma, Jie Chen, Zhongyu Mao, Jiaju Lin, Linjiang Chai & Jingfeng Wang
Pages: 2976-2989
DOI: 10.1080/02670836.2023.2231260
Enhanced adsorption films of dendrimers on mild steel for super protection
Minghui Zhong, Yueting Shi, Fang Gao & Hongru Li
Pages: 2990-3005
DOI: 10.1080/02670836.2023.2231261
Microstructural evolution of Ag-0.20wt-%Mg-0.19wt-%Ni alloy in under-oxidized condition
ZiYang Li, Kai Huang, Gang Zhu, XinLang Zuo & ChengCheng Chen
Pages: 3006-3014
DOI: 10.1080/02670836.2023.2231726
Effects of Ga and In on the properties of Zn-Al sacrificial anodes
Junqi Shao, Fei Yang, Jian Wang, Shenghua Deng, Yong Liang, Hongjin Zhao, Tongsheng Deng & Liang Xu
Pages: 3015-3024
DOI: 10.1080/02670836.2023.2231727
Friction extrusion of AZ91/bioactive glass gradient composite
Pourya Motavallian, Sayed Mahmood Rabiee & Hamed Jamshidi Aval
Pages: 3025-3039
DOI: 10.1080/02670836.2023.2233261
A visible light-sensitive argentous oxide/calcium aluminate nanocomposite photocatalyst
Zizhan Sun, Qianmin Cong, Xiaoyu Wang, Jiayin Cui, Zhengyu Cai, Chuangang Fan & Lizhai Pei
Pages: 3040-3052
DOI: 10.1080/02670836.2023.2237273
Effect of element segregation on deformation mechanisms of nano/ultrafine-grained 304 stainless steel
Miaomiao Zhao, Yang Liu, Hongyan Wu & Linxiu Du
Pages: 3053-3064
DOI: 10.1080/02670836.2023.2238413
Phase formation and electrical properties of SBNLT ceramics prepared via combustion technique
Thanapon Sinkruason, Anupong Luangpangai, Nipaphat Charoenthai, Aurawan Rittidech, Phieraya Pulphol, Naratip Vittayakorn & Theerachai Bongkarn
Pages: 3065-3075
DOI: 10.1080/02670836.2023.2238415
Optical, magnetic, and photoluminescence properties of Cr/Mn-doped ZnO nanoparticles synthesised by solution combustion method
S. M. Devasena, G. Murali, D. Amaranatha Reddy, Y. C. Ratnakaram, A. Sharon Smiley, K. Sunil Kumar & R. P. Vijayalakshmi
Pages: 3076-3089
DOI: 10.1080/02670836.2023.2239630
Critical Assessment 43: Microstructural and mechanical properties of friction stir additively fabricated SiC-Reinforced AA6061 build
Smrity Choudhury, Rahul Das, Durjyodhan Sethi, Joydeep Roy & Barnik Saha Roy
Pages: 3090-3110
DOI: 10.1080/02670836.2023.2239634
Investigations of performance characteristics on direct metal laser sintered MONEL K-500 superalloy
M. Mani, M. Mohanraj, A. G. Karthikeyan & K. Kalaiselvan
Pages: 3111-3122
DOI: 10.1080/02670836.2023.2240100
Modelling the laser surface hardening in a ferrite and pearlite initial microstructure
Felipe M. Castro Cerda, Constantinos Goulas, Dakota Jones, Ata Kamyabi, Douglas Hamre, Patricio Méndez & Gentry Wood
Pages: 3123-3133
DOI: 10.1080/02670836.2023.2240101
Effect of Fe addition on phase evolution, microstructure and properties of Ti50Ni50-XFeX alloy
Jagadish Parida, Subash Chandra Mishra & Ajit Behera
Pages: 3134-3149
DOI: 10.1080/02670836.2023.2240102
Die-sinking and rotary EDM surface and subsurface analysis of MoSi2-SiC ceramic composites
L. Selvarajan, R. Rajavel, Mohammed Yunus & Rami Alfattani
Pages: 3150-3166
DOI: 10.1080/02670836.2023.2240103
Microstructure and properties of AlCrxFeNi1.2Cu0.8 high-entropy alloys at high temperature
Chunyan Li, Zihui Tang, Yu Lu, Lin Tian, Jianshu Zhai, Xiaocheng Li & Shengzhong Kou
Pages: 3167-3176
DOI: 10.1080/02670836.2023.2240590
Hydrogen damage behaviour of X80 steel under high voltage direct current interference
Wenhui Liu, Wuxi Bi, Jianhua Liu, Maocheng Yan, Wei Lan, Yanhui Zhang, Wen Wen, Songmei Li & Mei Yu
Pages: 3177-3187
DOI: 10.1080/02670836.2023.2242722
The densification, microstructure, and mechanical properties of (TiB2+SiC)/AlSi10Mg composites manufactured by LPBF
Bo Dang, Zhao Zhang, Kan Li, Yan Chen, Junfeng Xu & Zengyun Jian
Pages: 3188-3197
DOI: 10.1080/02670836.2023.2244354
Constructing superior rate-performance manganese-based anode for lithium-ion batteries by tuning interface effect
Shenghe Wang, Song Li, Qianqian Cui, Zhongsheng Wen & Juncai Sun
Pages: 3198-3208
DOI: 10.1080/02670836.2023.2245655
Investigation on microstructure and mechanical properties of boron-modified 13Cr5Ni2Mo by powder-pack boriding
Samira Tlili, Saida Bouyegh, Abdelkader Daoui, Abdelmoumene Guedri, Mohamed Islam Tlili, Latifa Tairi, Mustapha Djama, Radouane Graine & Djihad Charmati
Pages: 3209-3219
DOI: 10.1080/02670836.2023.2245657
Evolution mechanism of the low-carbon MgO-based alkali-activated system under different heat-treatment conditions
Yaoting Jiang, Yuan Jia, Xinmei Zou, Jingxi Zhang & Yuxin Zou
Pages: 3220-3228
DOI: 10.1080/02670836.2023.2245659
Thermochemical modelling and mechanical property of the Al-7.6Si-xZr alloy
Prosanta Biswas, Subhajit Das, Sushil Chandra Das, Manas Paliwal, Himadri Roy & Manas Kumar Mondal
Pages: 3229-3243
DOI: 10.1080/02670836.2023.2245663
Microstructure and properties change in Al5+xCr12Fe35Mn28-xNi20 high entropy alloys
Sally Elkatatny, Atef Hamada, Huakang Bian, Akihiko Chiba & Mohamed A. H. Gepreel
Pages: 3244-3253
DOI: 10.1080/02670836.2023.2245666
Refining interface compatibility and carrier management via π-π conjugated stacking for efficient and stable perovskite solar cells based on low-temperature processing
Yun Yang
Pages: 3254-3262
DOI: 10.1080/02670836.2023.2246306
Parameters prediction in additively manufactured Al-Cu alloy using back propagation neural network
Feiyue Lyu, Leilei Wang, Jiahao Zhang, Mingzhen Du, Zhiwei Dou, Chuanyun Gao & Xiaohong Zhan
Pages: 3263-3277
DOI: 10.1080/02670836.2023.2246772
Effect of In on Fe phase morphology and properties of Cu-Fe alloy
Dawei Yuan, Zhenxia Liu, Chengjun Guo, Hao Zeng, Jianbo Zhang, Mingmao Li, Bingfeng Peng & Bin Yang
Pages: 3278-3287
DOI: 10.1080/02670836.2023.2246773
Tribological behaviours of Mo–Si–B–xTi alloys against Al2O3 ceramic and AISI 52100 steel
Hui Tan, Wenyuan Chen, Juanjuan Chen, Zongxiao Zhu, Shengyu Zhu & Jun Yang
Pages: 3288-3299
DOI: 10.1080/02670836.2023.2247917
Micromechanics-based understanding of the stability of film-like austenite in steels
Gaurav Kumar, Tanmay K. Bhandakkar, Sushil K. Mishra & Amol A. Gokhale
Pages: 3300-3307
DOI: 10.1080/02670836.2023.2249746
Enhancing the tribological properties of pure Ti by pinless friction surface stirring
M. Ashoori, M. Jafarzadegan, R. Taghiabadi, M. Saghafi Yazdi & I. Ansarian
Pages: 3308-3320
DOI: 10.1080/02670836.2023.2249749
Polymer nanocomposite films of Sr-doped BiVO4 for photodegradation of malachite green
B. M. Nithin, A. G. Jineesh & N. Manikanda Prabu
Pages: 3321-3331
DOI: 10.1080/02670836.2023.2253079
Low-cycle fatigue mashing behaviours of HTRB630 high-strength steel exposed to high temperatures
Li Gao, Mei-Ling Zhuang, Gong Zuo & Chuanzhi Sun
Pages: 3332-3344
DOI: 10.1080/02670836.2023.2257536
Characterisation of thin α-Al2O3 tribo-coating deposited by low-power gas tunnel plasma spray
Zulhelmi Alif Abd Halim & Norhayati Ahmad
Pages: 3345-3350
DOI: 10.1080/02670836.2023.2232986
Artificial neural network applicability in studying hot deformation behaviour of high-entropy alloys
Mohammad Reza Zamani, Hamed Mirzadeh & Mehdi Malekan
Pages: 3351-3359
DOI: 10.1080/02670836.2023.2231767
Statement of Retraction: Creep and mechanical properties of aluminium A356 composites reinforced with coated and un-coated MWCNTs fabricated using the stir casting method
Pages: 3360-3360
DOI: 10.1080/02670836.2023.2264127
