Materials Science and Technology, Vol. 39, No. 15, out now

This issue is focused on metals.

This issue contains the following articles, which are available to members via My IOM3.

Research progress on ceramic nanomaterials reinforced aluminium matrix nanocomposites
Subrata Mondal, Priya Mondal & Debi Prasad Mishra
Pages: 1841-1857
DOI: 10.1080/02670836.2023.2187153

Manufacturing and characterisation of magnesium composites reinforced by nanoparticles: a review
Monish P, Hari Krishna KL & Rajkumar K
Pages: 1858-1876
DOI: 10.1080/02670836.2023.2194745

Fabrication methods and property analysis of metal foams – a technical overview
Ali Nawaz & Sushila Rani
Pages: 1877-1902
DOI: 10.1080/02670836.2023.2186068

Increasing thermal conductivity in aluminium-copper compound castings: modelling and experiments
Hans Jürgen Maier, Richard Gawlytta, Andreas Fromm & Christian Klose
Pages: 1903-1913
DOI: 10.1080/02670836.2023.2184591

Effects of Zn addition on the microstructure and properties of Cu–Cr alloys
Yaxing Ma, Qian Lei, Jinjun Xu, Yuxin Liang, Xiangpeng Meng, Yibo Li & Zhu Xiao
Pages: 1914-1925
DOI: 10.1080/02670836.2023.2186050

Creep deformation study of squeeze cast AZ91 magnesium alloy
Hitesh Patil, Akshay Jain, Ankush Marodkar, Piyush Kumar, Abhijit Ghosh & Hemant Borkar
Pages: 1926-1938
DOI: 10.1080/02670836.2023.2186055
https://www.tandfonline.com/doi/abs/10.1080/02670836.2023.2186055?ai=1xji1&ui=95z5g&af=T

Structural modification of TA2/Q355B composite interface and study of TiC stability mechanism
Xiaoling Lei, Wenhong Ding, Ying Hu, Mengxian Wu & Huadong Hou
Pages: 1939-1949
DOI: 10.1080/02670836.2023.2186059

Rotary friction welding of Inconel 718 – AISI 304 stainless steel dissimilar joint
V. Ajay, M. Naveen Kumar, N. Kishore Babu, T. Mahesh Kumar, K. Vamshi Krishna & G. Madhusudan Reddy
Pages: 1950-1960
DOI: 10.1080/02670836.2023.2187146

Fracture toughness and high-cycle fatigue behaviour of Al–Mg and Al–Mg–Sc–Zr alloys
Zhiliang Li, Feng Jiang, Lele Liu & Ying Wang
Pages: 1961-1972
DOI: 10.1080/02670836.2023.2186596

Rubber toughened glass fibre reinforced high impact polystyrene
Fares D. Alsewailem & Abdulrahman M. Al-ameri
Pages: 1973-1976
DOI: 10.1080/02670836.2023.2187145

Plasma enhanced chemical vapour deposition of ZrO2 and YSZ coatings
L.J. Espinoza-Pérez & Eddie Lopez-Honorato
Pages: 1977-1987
DOI: 10.1080/02670836.2023.2187149
https://www.tandfonline.com/doi/abs/10.1080/02670836.2023.2187149?ai=1xji1&ui=95z5g&af=T

Refinement mechanism and optimization for compact strip production process
Kai Liu, Shusen Cheng, Xingwen Wei, Jipeng Li, Yongping Feng & Olena Volkova
Pages: 1988-1998
DOI: 10.1080/02670836.2023.2187150

Effect of aging treatment on properties of Al–Si alloy solidified at high-pressure
Haosheng Huang, Bo Jiang, Wentao Jiang, Ye Wang, Dongdong Zhu & Maoliang Hu
Pages: 1999-2005
DOI: 10.1080/02670836.2023.2187152

Si3N4–TiN conductive ceramic composites: topography on EDMed surfaces and precise drilled holes
L. Selvarajan & K. Venkataramanan
Pages: 2006-2017
DOI: 10.1080/02670836.2023.2187156

Microstructure characterisation of directionally solidified MnNi damping alloy under strong magnetic field
Diwei Wang, Qingchao Tian, Xiang Liu, Zhongmin Ren, Fuxing Yin &
Puguang Ji
Pages: 2018-2027
DOI: 10.1080/02670836.2023.2187524

Microstructure and tensile strength of electrodeposited Fe-rich bcc FeCoNi medium-entropy alloys
A. Watanabe, T. Yamamoto, R. Miyamoto & Y. Takigawa
Pages: 2028-2034
DOI: 10.1080/02670836.2023.2187973

Modelling deformation-induced martensite transformation in high-carbon steels
Adriel Wong, Vikram Bedekar, Rohit Voothaluru & Enrique Galindo-Nava
Pages: 2035-2049
DOI: 10.1080/02670836.2023.2187983

Conductive and anti-bacterial self-bundled nanofibrous yarns from electrostatic induction of Keggin polyoxometalates
Jirapong Arin, Pasinee Panith, Nakarin Subjalearndee, Pech Thongkam & Varol Intasanta
Pages: 2050-2061
DOI: 10.1080/02670836.2023.2188352

Prospective utilisation of hydrated lime as a performance enhancer in concrete
E. Dhanesh & M. Shanmugasundaram
Pages: 2062-2073
DOI: 10.1080/02670836.2023.2188671

Effect of P-MIG and CMT on microstructure and properties of 6082-T6 joints
Yaochao Wang, Mengnie Li, Xiaoyi Yang & Hanning Zuo
Pages: 2074-2089
DOI: 10.1080/02670836.2023.2191091

Microstructural characterisation and mechanical properties of the cast Gd-containing Mg−8Mg2Si in situ composites
Z. Tanhaee & R. Mahmudi
Pages: 2090-2101
DOI: 10.1080/02670836.2023.2191096

Microstructure and mechanical properties of medium manganese steel in intercritical annealing
Yan Feng, Cainian Jing, Tao Lin, Zhonglin Wu, Zhaotong Li & Jingrui Zhao
Pages: 2102-2110
DOI: 10.1080/02670836.2023.2191412

Effect of Ca content on microstructure and strength of as-extruded Mg-1.0Al-xCa alloy
Zhaoxiang He, Sen Wang, Chuncheng Ge, Chubin Yang, Qingshan Yang, Hucheng Pan & Gaowu Qin
Pages: 2111-2116
DOI: 10.1080/02670836.2023.2194139

Effect of pre-strain on high cycle fatigue property of TWIP steel
Qingxia Wang, Yibing Zhao, Yukun Fan, Peisi Zhao & Peigeng Fan
Pages: 2117-2123
DOI: 10.1080/02670836.2023.2194761

Wire-arc additive manufactured Al–Cu alloy: microstructure, mechanical properties and their anisotropy
Jiale Miao, Jiqiang Chen, Jieke Ren, Zhi Luo, Zhenglin Fan, Zixiang Zhou, Ting Xing & Renguo Guan
Pages: 2124-2134
DOI: 10.1080/02670836.2023.2194763

The microstructure and mechanical properties of 2219 alloy during ultrasonic treatment
An-qing Li, Ri-peng Jiang, Rui-qing Li & Li-hua Zhang
Pages: 2135-2146
DOI: 10.1080/02670836.2023.2194764

Preparation and characterisation of tin bronze/steel composites by solid–liquid bonding with vibration
Guangxu Dong, Bo Peng, Jia Sun, Shichao Liu, Qing Liu, Xiaoqi Sun, Xianlong Wang, Haimin Ding, Jinchuan Jie & Tingju Li
Pages: 2147-2157
DOI: 10.1080/02670836.2023.2195276

Effect of variable amplitude on fatigue life of 17CrNi steel beyond 10 cycles
Abdelhak Nehila & Wei Li
Pages: 2158-2167
DOI: 10.1080/02670836.2023.2195277

Effects of heat treatment on microstructure and properties of Fe-based amorphous composite coatings
Chunyan Li, Yishu Zhang, Jianshu Zhai, Chunling Li & Shengzhong Kou
Pages: 2168-2178
DOI: 10.1080/02670836.2023.2195750

ANN for design and fabrication of ENi-P-nano TiO2 coatings on AH36 steel
R. Anthoni Sagaya Selvan, Dinesh G. Thakur & Sachin Salunkhe
Pages: 2179-2190
DOI: 10.1080/02670836.2023.2195752

Influences of Sn on Fe phase segregation and properties of Cu-5Fe alloy
Xin Luo, Lanhao Wang, Dawei Yuan, Zhenxia Liu, Hang Wang, Xiangpeng Xiao, Hui Ming Chen, Chengjun Guo & Bin Yang
Pages: 2191-2204
DOI: 10.1080/02670836.2023.2195756

Effect of radial-shear rolling on particle’s morphology and mechanical properties of AA7075 alloy
Yury Gamin, Torgom Akopyan, Tatiana Kin, Sergey Galkin & Aleksander Aleshchenko
Pages: 2205-2216
DOI: 10.1080/02670836.2023.2196471