Materials Science and Technology, Vol. 39, No. 12, out now

This issue focuses on alloys, papers include Bauschinger effect in Gd micro-alloying metastable high-entropy alloy, the Phenomenological understanding of kappa-carbides on strengthening mechanisms, and the Effect of Sn on the microstructural evolution of quasicrystal-reinforced Mg–Zn–Y alloy.

This issue contains the following articles, which are available to members via My IOM3.

Tensile and wear properties of as-cast and extruded AZ91-xCNT and AZ91-1B4C-1SiC-xCNT composites
M. Goodarzi, M. Emamy & M. Malekan
Pages: 1425-1442
DOI: 10.1080/02670836.2023.2171780

Bauschinger effect in Gd micro-alloying metastable high-entropy alloy
J. Xu & L.M. Peng
Pages: 1443-1451
DOI: 10.1080/02670836.2023.2172806

Microstructure of Al–Mg–Si–La alloy under pulsed magnetic field treatment during solidification Meina Gong, Kui Liu, Wenxin Hu, Yongzhen Liu & Yonglin Ma
Pages: 1452-1462
DOI: 10.1080/02670836.2023.2173429

Phenomenological understanding of kappa-carbides on strengthening mechanism of low-density steel
L. L. Wei, G. H. Gao & R. D. K. Misra
Pages: 1463-1474
DOI: 10.1080/02670836.2023.2173430

Effect of Sn on the microstructural evolution of quasicrystal-reinforced Mg–Zn–Y alloy
Jiang Wang, Yu’an Chen & Fusheng Pan
Pages: 1475-1482
DOI: 10.1080/02670836.2023.2173431

The autocatalytic evolution of martensitic microstructure
J. R. C. Guimarães, P. R. Rios & A. L. M. Alves
Pages: 1483-1489
DOI: 10.1080/02670836.2023.2173432

Loading-direction dependence of interaction types between different twin variants in AZ31 alloy Guoqiang Xi, Yu Luo, Jing Zhang, Jianhao Chen & Hao Chen
Pages: 1490-1500
DOI: 10.1080/02670836.2023.2173434

The corrosion behaviour of a novel Mg–Zn–Zr–Y–Cu alloy
Hongmin Jia, Mengrui Wang & Sheji Luo
Pages: 1501-1508
DOI: 10.1080/02670836.2023.2173893

Effect of cooling rate on microstructure and mechanical properties of Mg-9Gd-4Y-1Zn-1Al alloy Yuanke Fu, Liping Wang, Yicheng Feng, Lei Wang & Sicong Zhao
Pages: 1509-1518
DOI: 10.1080/02670836.2023.2173895

Effect of rolling deformation on microstructure and mechanical properties of Mg–Y–Nd–Al alloy
Erjun Guo, Yang Cao, Lei Wang, Sicong Zhao, Yicheng Feng & Yuanke Fu
Pages: 1519-1529
DOI: 10.1080/02670836.2023.2173896

The analysis of hot deformation behaviour of low-cost α+β Ti-6Al-0.4V-1.2Fe alloys
Guilin Wan, Zhihao Ren, Yanhua Guo, Zhonggang Sun & Hui Chang
Pages: 1530-1542
DOI: 10.1080/02670836.2023.2173897

Nanoindentation size effects of mechanical and creep performance in Ni-based superalloy
Yanyan Huang, Cheng Zhou, Keyan Chen, Yuxin Yang, Jiankun Xiong, Jianping Yang, Yang Guo, Guijun Mao, Lin Yang, Fuheng Nie, Xia Li & Qinghua Zhou
Pages: 1543-1554
DOI: 10.1080/02670836.2023.2173898