Materials Science and Technology, Vol. 39, No. 11, ready to read

This issue looks at mechanical properties, coating effects, composites and alloys.

This issue contains the following articles, which are available to members via My IOM3.

Dynamic compression behaviour and microstructural evolution of the Mg–6Zn–2Ce–0.6Zr alloy
Chenkun Xu, Zhi Wang, Feng Wang, Le Zhou, Pingli Mao, Ziqi Wei & Zheng Liu
Pages: 1289-1303
DOI: 10.1080/02670836.2022.2164816

Improved mechanical properties of the E-glass fibres through TiO2 nanoparticle coating
Md Kawsar Ahmed, Ali Bagheri Behboud, Arda Kurucu, Göksenin Kurt Çömlekçi & Mustafa Ordu
Pages: 1304-1312
DOI: 10.1080/02670836.2022.2164817

Grain boundary and grain interior strengthening in nano-micron grain sized Cu-1wt.%Al2O3 composite
S. B. Chandrasekhar, M. Ramakrishna, N. P. Wasekar, T. N. Rao & B. P. Kashyap
Pages: 1313-1321
DOI: 10.1080/02670836.2023.2165653

Oxidation properties of Ti-47.5Al-2.5V-1.0Cr-0.2Zr alloy at 950–1050 °C
Xuejian Lin, Hongjun Huang, Xiaoguang Yuan, Yinxiao Wang, Bowen Zheng, Xiaojiao Zuo & Ge Zhou Pages: 1322-1336
DOI: 10.1080/02670836.2023.2167295

Abnormal grain growth induced by <112̄0> orientation of AZ31 magnesium alloy
Ruinan Chen, Qinghua Chen, Peng Peng, Bin Tan, Xu Huang, Qingsong He, Jian Su, Chao Xu, Huahong Deng & Qingwei Dai
Pages: 1337-1349
DOI: 10.1080/02670836.2023.2167297

Enhancing the mechanical properties of coarse-grained cemented carbides by tailoring microstructure
Songbai Yu, Jianfeng Zhang, Jing Tong, Fanlu Min, Hailong Zhang, Jichang Ma, Congxu Wang & Kui Zhao
Pages: 1350-1360
DOI: 10.1080/02670836.2023.2170630

Analysis of decarburisation mechanism of Fe-C alloy strip
Meijie Zhou, Liqun Ai, Lukuo Hong, Yaobin Hou & Caijiao Sun
Pages: 1361-1371
DOI: 10.1080/02670836.2023.2170731

Failure analysis of single-point butt clinched joint with dissimilar aluminium alloy sheets
Xiaoqiang Ren & Chao Chen
Pages: 1372-1381
DOI: 10.1080/02670836.2023.2170736

Study on microstructure evolution and hot deformation behaviour of Cu–6.5Fe–0.3Mg alloy
Lanhao Wang, Xin Luo, Dawei Yuan, Jinshui Chen, Huiming Chen, Hao Huang, Xiangpeng Xiao & Bin Yang
Pages: 1382-1392
DOI: 10.1080/02670836.2023.2170742

Stacking fault energy and creep mechanism of a single-crystal nickel-based superalloy
Guangyan Wang, Sugui Tian, Ning Tian, Xinjie Zhu, Shunke Zhang & Song Zhang
Pages: 1393-1401
DOI: 10.1080/02670836.2023.2171600

Effect of welding speed on microstructural and mechanical properties of EB Ti-15V-3Al-3Cr-3Sn welds
K. Vamsi Krishna, M. K. Talari, Bharath Bandi, Sriharitha Rowthu, M. I. Khan, P. Mastanaiah & N. Kishore Babu
Pages: 1402-1413
DOI: 10.1080/02670836.2023.2171765

Electrodeposition of SnO2 nanostructures onto copper substrates and their electrochemical properties
D. Vasanth Raj, N. Ponpandian & C. Viswanathan
Pages: 1414-1424
DOI: 10.1080/02670836.2023.2171766