Ironmaking & Steelmaking Vol. 51, No. 5, out now
Continuous casting, hot metal charging and molten bath mixing feature in this issue.
This issue contains the following articles, which are available to members via My IOM3.
Influencing mechanism of (V, Ti)@(C, N) compounds on the viscosity of hot metal
Zhengxue Jiang, Wenzhou Yu, Lanjiang Song, Piao Hou, Meilong Hu, Chenguang Bai
pp. 397–410
DOI: 10.1177/03019233241251928
Mathematical modelling and techno-economic analysis of electric arc furnace steelmaking process with hot metal charging in China
Hang Hu, Lingzhi Yang, Yuchi Zou, Botao Xue, Feng Chen, Shuai Wang, Yufeng Guo
pp. 411–426
DOI: 10.1177/03019233241251929
Analysis of Carbon Dioxide Emissions in Bottom-blowing O2-CO2-CaO Process in Basic Oxygen Furnace Steelmaking
Xin Ren, Kai Dong, Chao Feng, Guangsheng Wei, Chunyang Wang, Rong Zhu
pp. 427–440
DOI: 10.1177/03019233241251589
Structural optimisation of three-strand asymmetric tundish for super large round bloom continuous casting
Xiqing Chen, Yun Bai, Wenwen Feng, Hong Xiao, Haiyan Tang, Pu Wang, Jiaquan Zhang
pp. 441–459
DOI: 10.1177/03019233241251592
Effect of cavity shape caused by jet impact of swirl-type oxygen lance on molten bath mixing efficiency
Xi Wang, Kun Liu, Guangqiang Liu, Peng Han, Haoran Ma
pp. 460–469
DOI: 10.1177/03019233241251596
Study of lime flow rate on calcium looping carbon capture for steel plant
Chayut Sungsook, Thongchai Rohitatisha Srinophakun
pp. 470–480
DOI: 10.1177/03019233241251598
Mechanism of surface rust defects on tinplate strip steel during storage and transportation
Wenjun Zhang, Zhenhua Bai, Jiaxu Ran, Shihao Xu, Haodong Ji, Wenlong Guo, Sahal Ahmed Elmi
pp. 481–492
DOI: 10.1177/03019233241251607
DT-MNLR: a novel hybrid machine learning framework for precise coke strength and reactivity prediction
Wen-Qiang Wang, Li-Jing Yuan, Zi-Chu Zhao, Ya-Jie Liu
pp. 493–501
DOI: 10.1177/03019233241250132
Intervention mechanism of carbide precipitation during tempering and its impact on residual stress and mechanical properties of wear-resistant steels
Yang Chen, Wenhong Ding, Liang Liang, Xuhui Liu, Hongbing Wang, Shaolin Xiao, Quhao Chen, Yan Yang, Wenzhi Yang
pp. 502–512
DOI: 10.1177/03019233241250136